|
Project: Contract Surveying,
Construction of Highway 421 Interchange with US1
Project Size: 19,000 meters of roadway with 7 bridges5
Project Location: North of Sanford, Lee County, North Carolina
Date of Completion: December 2007
Synopsis: Construction staking of the clover leaf interchange
and transition ramps, service roads, widening along US 1, bridges, and
2,100 meters of virgin divided highway.All
work is to NCDOT Standards working closely with the contractor, Resident
Engineer, and DOT Staff to meet the project goals.
Project: Topographic Survey & Mapping/ Engineering
Design Services/ Construction Layout for Eagle Point Village Apartments
Project Size: 18 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date Completed: April 2007
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Project consist of 15, 20 unit, apartment buildings, a Club
House with swimming pool and tennis court and associated parking. Engineering
services included a site design, road widening, a balanced earthwork
grading plan, an erosion control plan, storm drainage network to include
a wet detention pond, domestic water extension, and sanitary sewer extension
to serve the development. Upon request the site features (curb and gutter,
building pad, building corners, storm systems, sanitary sewer systems
etc.) will be staked for construction. Construction period services
are also included when construction commences.
Project: Contract Surveying
and layout for Construction of the Bingham Drive Widening-A design build
project
Project Size: 15,000 feet of roadway with 1 bridgeProject
Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: December 2007
Synopsis: Construction staking of all utilities, earthworks,
and pavements to improve Bingham Drive from a 2 lane highway to a 5
lane by-pass which will connect the Hope Mills By-pass to Highway 401
.All work is to NCDOT Standards working closely with the contractor,
Resident Engineer, and DOT Staff to meet the project goals.
Project: Topographic Survey & Mapping/ Construction
Staking for Crescent Commons Apartments Phase II
Project Size: 18 acres
Project Location: Cumberland County, North Carolina
Date of Completion: September 2007
Synopsis: Provide topographic survey of the site so the plan
documents can be revised. Provide survey/layout services for the construction
of the site improvements. Improvements include rough grade stakes, storm
structures, sanitary sewer structures, fine grade stakes, edge of pavement/back
of curb, and building layout.
Project: Contract Surveying, Rick Hendrick Dealership on Skibo Road
Project Size: 20 acres
Project Location: Cumberland County, North Carolina
Date of Completion: September 2007
Synopsis: Construction staking of the designed site improvements
for the new Rick Hendrick car dealership. Staking includes, clearing limit
layout, rough grade stakes, storm structures, sanitary sewer structures, fine
grade stakes, edge of pavement/back of curb, and building/column line layout.
Project: Construction Staking, Duplin County Airport
Project Size: 150 ac
Project Location: Duplin County, North Carolina
Date of Completion: September 2007
Synopsis: Construction staking of the designed site improvements.
Staking includes, clearing limit layout, rough grade stakes, storm structures,
fine grade stakes, and edge of pavements.
Project: Topographic Mapping / Engineering Design Services/ Construction
Layout for Surry Meadows Subdivision
Project Size: 32 acres
Project Location: Cumberland County, North Carolina
Date of Completion: December 2007
Synopsis: Topographic Survey and mapping of the property. All existing
terrain and manmade features located and mapped for design services. Project
consists of single family residential lots. Engineering services includes a
site design, a grading and erosion control plan, storm drainage network, domestic
water extension, gravity sanitary sewer system with to serve the development.
Upon request the site features (curb and gutter, storm systems etc.) will be
staked for construction.
Project: Topographic Mapping / Engineering Design Services/ Construction
Layout for Massey Hill Subdivision
Project Size: 25 acres
Project Location: Cumberland County, North Carolina
Date of Completion: February 2008
Synopsis: Topographic Survey and mapping of the property. All existing
terrain and manmade features located and mapped for design services. Project
consists of single family residential lots. Engineering services includes a
site design, a grading and erosion control plan, storm drainage network, domestic
water extension, gravity sanitary sewer system with to serve the development.
Upon request the site features (curb and gutter, storm systems etc.) will be
staked for construction.
Project: Topographic Survey & Mapping/ Engineering
Design Services/ Construction Layout for Churchill Subdivision
Project Size: 38.6 acres
Project Location: Hoke County, North Carolina
Date Completed: July 2006
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Engineering services included a lot layout, a grading, drainage
and erosion control plan, a road widening plan and domestic water extension
to serve 68 lots. The site features (curb and gutter, storm systems,
domestic water etc.) are being staked for construction.
Project: Topographic Survey & Mapping/
Engineering Design Services/ Construction Layout for Persimmon Hill
Subdivision
Project Size: 67.5 acres
Project Location: Harnett County, North Carolina
Date Completed: January 2007
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Engineering services included a lot layout, a grading, drainage
and erosion control plan, and a domestic water extension to serve 103
lots. Upon request the site features (curb and gutter, storm systems,
sanitary sewer systems etc.) will be staked for construction.
Project: Topographic Survey & Mapping/
Engineering Design Services/ Construction Layout for Kings Grant Section
B2, D2 and D3
Project Size: 29.5 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date Completed: May 2006
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Project consists of single family residential lots located
inside of a golf course development. Engineering services included a
site design, a grading and erosion control plan, storm drainage network,
domestic water extension, and sanitary sewer extension to serve the
single family lots. The site features (curb and gutter, storm systems,
domestic water etc.) are being staked for construction.
Project: Topographic Survey & Mapping/
Engineering Design Services/ Construction Layout for Cedar Creek Mixed
Use Development
Project Size: 43 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date Completed: December 2008
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Project is a mixed use development consisting of single family
homes, multifamily development and commercial property. Engineering
services includes a site design, a grading plan, erosion control plan,
storm drainage network, domestic water extension and sanitary sewer
extension to serve the development. Upon request the site features (curb
and gutter, building pad, building corners, storm systems, sanitary
sewer systems etc.) will be staked for construction.
Project: Topographic Survey & Mapping/
Engineering Design Services/ Construction Layout for Waterford Villas
Phase II
Project Size: 6.4 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date Completed: December 2007
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Project consists of 13 duplex residential units. Engineering
services includes a site design, a grading and erosion control plan,
storm drainage network, domestic water extension, and sanitary sewer
extension to serve the development. Upon request the site features (curb
and gutter, storm systems, sanitary sewer systems etc.) will be staked
for construction.
Project: Topographic Survey & Mapping/
Engineering Design Services/ Construction Layout for Deep Creek Carwash
Project Size: 0.9 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date Completed: January 2005
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Engineering services included a site design, a grading, drainage
and erosion control plan to serve a car wash. The site features (edge
of pavement, building corners, utilities, etc.) were staked for construction.
Project: Topographic Survey & Mapping/ Engineering Design
Services/ Construction Layout for Dollar General
Project Size: 0.8 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date Completed: August 2003
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Engineering services included a site design, a grading, drainage
and erosion control plan to serve a new Dollar General building. The
site features (edge of pavement, building corners, utilities, etc.)
were staked for construction.
Project: Topographic Survey & Mapping/ Engineering Design
Services/ Construction Layout for Countrywide Mortgage Office Site
Project Size: 1.2 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date Completed: June 2006
Synopsis: Topographic Survey and mapping of the property. All
existing terrain and manmade features located and mapped for design
services. Project consists of two office buildings and associated parking.
Engineering services included a site design and a grading, drainage
and erosion control plan. The site features (curb and gutter, storm
systems, sanitary sewer systems etc.) are being staked for construction.
Project: Contract Surveying, Rivers Edge subdivision
Project Size: 93 acres of land
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: December 2006
Synopsis: Boundary, topographic, and wetland surveys to serve
as the base map data for design documents. Construction staking of the
designed site improvements for the subdivision. Staking includes, clearing
limit layout, rough grade stakes, storm structures, sanitary sewer structures,
fine grade stakes, edge of pavement/back of curb, and lot lines.
Project: Topographic Survey of Silver Creek
Project Size: 20 acres
Project Location: Morganton, NC
Date of Completion: June 2007
Synopsis: Provide a topographic base map depicting existing
conditions, as well as stream features for design purposes. Features
included ground elevations, sewer mains, water mains, stream pools,
ripples, creek banks, buildings, etc.
Project: Contract Surveying, Construction
Staking Kings Grant Phase I Sewer Rehab
Project Size: 6 miles of Sewer Main
Project Location: Wilmington, New Hanover County, North Carolina
Date of Completion: June 2006
Synopsis: Construction staking of the designed new sanitary
sewer system for the City of Wilmington. The project consists of 35,000
linear feet of gravity sanitary sewer. Each manhole and bore point is
being staked with offsets, which will survive the project. In addition,
the plans indicate utility conflicts, which were staked out at the beginning
of the project so the contractor could perform soft digs to obtain data
on the existing utility. The surveyor is correlating this information
and appropriate adjustments are being submitted to the engineer for
revision.
Project: Construction Staking and As-Built
Mapping for the New Hanover County Landfill
Project Size: 17 acres
Project Location: Wilmington, New Hanover County, NC
Date of Completion: May 2006
Synopsis: Construction staking of the sub grade, clay liner,
and protective cover layers for the construction of the Subtitle D Landfill.
Staking required numerous lifts of material as specified in the design
plans with the elevations of each lift certified as to compliance prior
to beginning the next. Upon completion of the landfill and the subsequent
improvements, a final as built was provided both in hardcopy and digital
format of the landfill cells and all improvements constructed.
Project: Contract Surveying, GISA Compound
Project Size: 6 acres of development
Project Location: Fort Bragg, North Carolina
Date of Completion: November 2006
Synopsis: Construction staking of the designed site improvements
for the GISA compound. Improvements include demolition layout, rough
grade stakes, storm structures, sanitary sewer structures, fine grade
stakes, edge of pavement/back of curb, and building layout.
Project: Boundary survey and mapping
Project Size: 90 acres of land
Project Location: Raeford, Hoke County, North Carolina
Date of Completion: April 2006
Synopsis: Boundary Survey and mapping of the entire farm owned
at the time of survey. The farm is comprised of several tracts of land,
which have been purchased at different times over the years. Original
documents dating back to 1892 have been recovered from the land owners
and utilized to trace the steps of the original surveyor.
Project: Topographic Survey of selected sites
for PWC’s BMP watershed
Project Size: 75 acres
Project Location: Fayetteville, Cumberland County, NC
Date of Completion: December 2006
Synopsis: Provide a topographic base map depicting existing
conditions, as well as stream features for design purposes. Boundary
surveys and easement maps were provided for land and easement acquisition.
Project: Legacy at Carrington Apartments
Project Size: 18 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: June 2006
Synopsis: Construction staking of the designed site improvements.
Staking includes, clearing limit layout, rough grade stakes, storm structures,
sanitary sewer structures, fine grade stakes, edge of pavement/back
of curb, and building layout.
Project: McArthur Road Apartments
Project Size: 20 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: November 2006
Synopsis: Construction staking of the designed site improvements.
Staking includes, clearing limit layout, rough grade stakes, storm structures,
sanitary sewer structures, fine grade stakes, edge of pavement/back
of curb, and building layout.
Project: Contract Surveying, Construction
of a portion of the Fayetteville Outer Loop Project
Project Size: 2.8 miles of roadway
Project Location: North of Fayetteville, Cumberland County, North Carolina
Date of Completion: December 2004
Synopsis: This project was let in two phases, the first contractor
on site built the subgrade, storm drain & major structures. Our
portion of the work was the layout for the fine grading and paving.
With the project broken up the way that it was, NCDOT control was gone
by the letting of the second phase. Survey control was established by
surveying the existing in place major structures then the design alignment
was "massaged" to tie to them. This worked perfectly and the
project went smoothly.
Project: Establish Aerial Control Targets
Project Size: 25,000 Acres
Project Location: Near Columbia, Tyrrell County, North Carolina
Within Budjet: YES
Date of Completion: August 2004
Synopsis: Establish aerial control targets as directed by the
photogrammetrist for a large project site. Flight lines and target locations
are determined by the photogrammetrist and communicated digitally to
the surveyor. The targets and existing NCGS control data are then plotted
for field use. Once the last target is set, the photogrammetrist will
be notified that the site is ready for flight. After QA/QC procedures
are completed a list, (asc file) will be sent to the photogrammetrist
along with a certification letter for the data provided, containing
the X,Y,& Z values for each target.
Project: Construction Staking, Harnett County
Airport Phase II
Project Size: 1500 feet of new roadway
Project Location: Near Lillington, Harnett County, North Carolina
Date Completed: August 2004
Synopsis: Construction staking of the
designed site improvements. Staking included, clearing limit layout,
rough grade stakes, storm structures, fine grade stakes, and edge of
pavements. This project was done entirely with GPS up until the fine
grade layout.
Project: South River
Electric Membership Corporation Headquarters Facility
Project Size: 5 acres
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: July 2005
Synopsis: Construction staking of the designed site improvements.
Staking includes, clearing limit layout, rough grade stakes, storm structures,
sanitary sewer structures, fine grade stakes, edge of pavement/back
of curb, and building/column line layout.
Project: Topographic
Survey & Mapping/ Engineering Design Services/ Construction
Layout for 301 Environmental Services Office Complex
Project Size: 12 acres
Project Location: Stedman, Cumberland County, North Carolina
Date of Completion: June 2004
Synopsis: Topographic Survey and mapping of the property owned
by the client at the time of survey. All existing terrain and manmade
features located and mapped for design services. Upon completion of
the existing survey, a set of engineering drawings will be produced.
Upon request the site features (curb and gutter, building pad, building
corners, storm systems, sanitary sewer systems etc.) will be staked
for construction.
Project: Contract Surveying, Construction Staking Black and Decker
Road
Project Size: 2 miles
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: December 2004
Synopsis: Construction staking of the redesigned alignment of
Black and Decker Road from the intersection at Cumberland Road to its
intersection with US Highway 301. The project is being performed using
the metric system and utilizes both conventional and GPS surveying disciplines
for staking. All work is to NCDOT Standards, working closely with the
Contractor, Resident Engineer, and DOT staff to meet the project goals.
Project: Contract Surveying, Construction Staking Cliffdale Road
Project Size: 5 miles
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: December 2005
Synopsis: Construction staking of the redesigned alignment of
Cliffdale Road from the intersection of US Highway 401(Raeford Road) to
its intersection with Reilly Road. Project is being performed using the
metric system and utilizes both conventional and GPS surveying disciplines
for staking. All work is to NCDOT Standards working closely with the contractor,
Resident Engineer, and DOT Staff to meet the project goals.
Project: Ardeens Family Housing
Project Size: 47 acres
Project Location: Fort Bragg, Cumberland County, North Carolina
Date of Completion: July 2005
Synopsis: Construction staking of the designed site improvements.
Staking includes, clearing limit layout, rough grade stakes, storm structures,
sanitary sewer structures, fine grade stakes, edge of pavement/back
of curb, and building/column line layout.
Project: Contract Surveying, Construction Staking Hope Mills
Road
Project Size: 5 miles
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: June 2003
Synopsis: Construction staking of the redesigned alignment
of Hope Mills Road from the Town of Hope Mills to Raeford Road in Cumberland
County. Project is being performed using the metric system and utilizes
both conventional and GPS surveying disciplines for staking. All work
is to NCDOT Standards, working closely with the contractor, Resident
Engineer, and staff to meet the project goals.
Project: Establish Aerial Control Targets
Project Size: 27 Acres
Project Location: Near Warrenton, Warren and Vance County, North Carolina
Within Budjet: YES
Date of Completion: January 2003
Synopsis: Establish aerial control targets as directed by the
photogrammetrist for 2 project sites. Flight lines and target locations
are determined by the photogrammetrist and communicated digitally to
the surveyor. The targets and existing NCGS control data are then plotted
for field use. Once the last target is set, the photogrammetrist will
be notified that the site is ready for flight. After QA/QC procedures
are completed a list, (asc file) will be sent to the photogrammetrist
along with a certification letter for the data provided, containing
the X,Y,& Z values for each target.
Project: Construction Staking and As-Built Mapping for the Johnston
County Landfill
Project Size: 12 acres
Project Location: Near Smithfield, Johnston County, NC
Within budget: YES
Date Completed: January 2003
Synopsis: Construction staking of the sub grade, clay liner,
and protective cover layers for the construction of the Subtitle D Landfill.
Staking required numerous lifts of material as specified in the design
plans with the elevations of each lift certified as to compliance prior
to beginning the next. Upon completion of the landfill and the subsequent
improvements, a final as built was provided both in hardcopy and digital
format of the landfill cells and all improvements constructed.
Project: Contract Surveying, Construction Staking Navassa Sewer
System
Project Size: 12 miles of Sewer Main
Project Location: Navassa, Brunswick County, North Carolina
Date of Completion: November 2003
Synopsis: Construction staking of the designed new sanitary sewer
system for the City of Navassa. The project consists of 60,000 linear
feet of gravity sanitary sewer and approximately 4000 linear feet of force
main. Each manhole and bore point is being staked with offsets, which
will survive the project. In addition, the plans indicate utility conflicts,
which were staked out at the beginning of the project so the contractor
could perform soft digs to obtain data on the existing utility. The surveyor
is correlating this information and appropriate adjustments are being
submitted to the engineer for revision.
Project: Contract Surveying, Former Carolina Transformer Site,
on US Hwy. 301, Environmental Cleanup
Project Size: 15 acres of site work
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: June 2003
Synopsis: The soil on the site had been contaminated due the
processes involved in the production of electricity at the site. The
general contractor is removing the soil and treating it to remove impurities.
The surveys divide the area into grids, and existing grades are established.
Once the soil is removed, additional grades are collected thus measuring
the amount of soil that has been treated. Volume reports and as-built
drawings are submitted for the use of the contractor and their staff.
Project: Contract Surveying, WalMart Super Center
Project Size: 35 acres of land
Project Location: Spring Lake, Cumberland County, North Carolina
Date of Completion: December 2003
Synopsis: Construction staking of the designed site
improvements for the WalMart Super Center. Staking includes, clearing
limit layout, rough grade stakes, storm structures, sanitary sewer structures,
fine grade stakes, edge of pavement/back of curb, and building/column
line layout.
Project: Topographic
Surveying and Basemapping for Runway Improvements, Clinton-Sampson County
Airport
Project Size: 4,200 feet of runway and aprons
Project Location: Clinton, Sampson County, North Carolina
Date Completed: November 2003
Synopsis: Using vehicle mounted GPS, we surveyed the runway
and aprons for Talbert & Bright. This information was used to design
subsequent runway improvements.
Project: Topographic Surveying and Basemapping for Hanger Improvements,
Duplin County Airport
Project Size: 8 acres
Project Location: Kennansville, Duplin County, North Carolina
Date Completed: November 2003
Synopsis: Topographic survey information was collected using
GPS and Robotic Total Stations. The data was mapped using Land Development
Desktop and digitally delivered to the client, Talbert and Bright.
Project: Establish
Aerial Control Targets
Project Size: 150 Acres
Project Location: Near Kitty Hawk, Dare County, North Carolina Estimated
Date of Completion: July 2003
Synopsis: Establish aerial control targets as directed
by the photogrammetrist for the project site. Flight lines and target
locations are determined by the photogrammetrist and communicated digitally
to the surveyor. The targets and existing NCGS control data are then
plotted for field use. Once the last target is set, the photogrammetrist
will be notified that the site is ready for flight. After QA/QC procedures
are completed a list, (asc file) will be sent to the photogrammetrist
along with a certification letter for the data provided, containing
the X,Y,& Z values for each target.
Project: Construction Staking, Harnett
County Airport
Project Size: 1200 feet of new roadway
Project Location: Near Lillington, Harnett County, North Carolina
Date Completed: December 2003
Synopsis: Construction staking of the
designed site improvements. Staking included, clearing limit layout,
rough grade stakes, storm structures, fine grade stakes, and edge of
pavements.
Project: Topographic Survey of the Cross Creek
Project Size: 20 acres
Project Location: Fayetteville, Cumberland County, NC
Within budget: YES
Date Completed: June 2002
Synopsis: Provide a topographic base map depicting existing
conditions, as well as stream features for design purposes. Features
included ground elevations, sewer mains, water mains, stream pools,
ripples, creek banks, buildings, etc.
Project: Volumetric Surveying—Eagle Island Dike Raising
Cells 1 & 3
Project Size: 275 acres
Project Location: Near Wilmington, Brunswick County, North Carolina
Date Completed: September 2003
Synopsis: Through the use of All Terrain Vehicle mounted GPS,
4D provided control staking and volume determination (using 3-D Modeling)
on the Corps of Engineers installation of the earthen berm surrounding
the containment area on the island.
Project: Contract Surveying, FORSCOM Motor pool
Project Size: 4 acre of development
Project Location: Fort Bragg, North Carolina
Date of Completion: August 2004
Synopsis: Construction staking of the designed site improvements
for the FORSCOM Motor pool. Improvements include, demolition layout, rough
grade stakes, storm structures, sanitary sewer structures, fine grade
stakes, edge of pavement/back of curb, and building layout.
Project: Contract Surveying, Construction Staking Cumberland
Road
Project Size: 2 miles
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: August 2003
Synopsis: Construction staking of the redesigned alignment
of Cumberland Road from the intersection at Hope Mills Road to the end
of the existing five lane section which was constructed under a different
project near Owen Drive. The project is being performed using the metric
system and utilizes both conventional and GPS surveying disciplines
for staking. All work is to NCDOT Standards, working closely with the
Contractor, Resident Engineer, and other DOT staff to meet the projected
goals.
. Project: Construction Staking, Layout
of Lighting assemblies at the Kinston Airport
Project Size: A long Airport Runway
Project Location: Kinston, NC
Within budget: YES
Date Completed: August 2002
Synopsis: Provide layout for various lighting systems and the
reference marks needed to aim the lighting arrays. All layout was done
via GPS and based on the existing centerline of the runway.
Project: Boundary Survey, Mapping, and Subdivision
Project Size: 18 acres of land
Project Location: Near Fayetteville, Cumberland County, North Carolina
Within Budget: YES
Date of Completion: September 2002
Synopsis: Boundary Survey and mapping of the entire property
owned at the time of survey. The property was comprised of one tract of
land. Upon completion of the boundary, a portion of the property was subdivided
and a plat provided to the owner for recording at a later date.
Project: Construction
Staking, Layout of Lighting assemblies at the Monroe Airport
Project Size: Along Runway
Project Location: Monroe, NC
Within budget: YES
Date Completed: December 2002
Synopsis: Provide layout for various lighting systems and the
reference marks needed to aim the lights. All layout was done via GPS
and based on the existing centerline of the runway.
Project: Boundary Survey, Mapping, and Subdivision
Project Size: 240 acres of land
Project Location: Raeford, Hoke County, North Carolina
Date of Completion: May 2003
Synopsis: Boundary Survey and mapping of the entire farm owned
at the time of survey. The farm is comprised of several tracts of land,
which have been purchased at different times over the years. Parcels
have been sold and easements granted to NCNG, Seaboard Coastal Railroad,
and the North Carolina Department of Transportation. Upon completion
of the boundary, a portion of the farm will be subdivided and the entire
farm platted.
Project: Contract Surveying, Construction Staking Bailey Lake
Road
Project Size: 0.3 miles
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: March 2003
Synopsis: Construction staking of the redesigned alignment of
Bailey Lake Road at the Bingham Drive intersection. Project is being performed
in the English system and utilizes both conventional and GPS surveying
disciplines for staking. All work is to NCDOT Standards working closely
with the, contractor, Resident Engineer, and Staff to meet the projected
goals.
Project: Contract Surveying, Construction Staking All American
Interchange with Raeford Road
Project Size: .3 miles
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: April 2003
Synopsis: Construction staking of the redesigned alignment of
the interchange for the All American Expressway and Raeford Road. Project
is being performed in the English system and utilizes both conventional
and GPS surveying disciplines for alignment staking. All work is to NCDOT
Standards working closely with the contractor, Resident Engineer, and
DOT Staff to meet the project goals.
Project: Boundary, Subdivision, and ALTA/ACSM Survey
Project Size: 600 acres
Project Location: Near Leland, Dupont Facility, North Carolina
Date of Completion: April 2003
Synopsis: 600 plus acre site to be mapped and an ALTA/ACSM
Boundary Survey to be delivered. Control Panels were set via GPS with
aerial photography utilized for the on-site infrastructure. Photograph
manuscripts were augmented by field inspection and editing, actual location
of building corners and property line possession.
Project: Contract Surveying, FATO Motor pool
Project Size: 1 acre of development
Project Location: Fort Bragg, North Carolina
Date of Completion: May 2003
Synopsis: Construction staking of the designed site improvements
for the FATO Motor pool. Improvements include, demolition layout, rough
grade stakes, storm structures, sanitary sewer structures, fine grade
stakes, and building layout.
Project: Establish Aerial Control Targets
Project Size: 400 Acres
Project Location: Near Asheboro, Randolph County, North Carolina
Date of Completion: July 2003
Synopsis: Establish aerial control targets as directed by the
photogrammetrist for the project site. Flight lines and target locations
are determined by the photogrammetrist and communicated digitally to
the surveyor. The targets and existing NCGS control data are then plotted
for field use. Once the last target is set, the photogrammetrist will
be notified that the site is ready for flight. After QA/QC procedures
are completed a list, (asc file) will be sent to the photogrammetrist
along with a certification letter for the data provided, containing
the X,Y,& Z values for each target.
Project: Contract Surveying, Lowes Home Super Center
Project Size: 30 acres of land
Project Location: Dunn/ Erwin, Harnett County, North Carolina
Date of Completion: December 2003
Synopsis: Construction staking of the designed site improvements
for the WalMart Super Center. Staking includes, clearing limit layout,
rough grade stakes, storm structures, sanitary sewer structures, fine
grade stakes, edge of pavement/back of curb, and building/column line
layout.
Project: Topographic Survey & Mapping/ Engineering Design
Services/ Construction Layout for a New Dental Office
Project Size: 1.5 acres
Project Location: Raeford, Hoke County, North Carolina
Date of Completion: September 2003
Synopsis: Topographic Survey and mapping of the property owned
by the client at the time of survey. All existing terrain and manmade
features located and mapped for design services. Upon completion of
the existing survey, a set of engineering drawings will be produced.
Upon request the site features (curb and gutter, building pad, building
corners, storm systems, sanitary sewer systems etc.) will be staked
for construction.
Project: QA/QC Control Surveys for FEMA mapping for the North
Carolina Geodetic Survey Division, Phase II
Project Size: 5 Counties
Project Location: Randolph, Montgomery, Richmond, Anson, and Stanly
Counties
Date Completed: September 2001
Synopsis: Establish Control and locate test points (120 points
in each county) within polygons as established by NCGS in order to confirm
the quality of data obtained via LIDAR mapping in the river basins.
Control Points (minimum of 10 in each county) are set via static GPS
missions and individual points located by either GPS or conventional
methods.
Project: Topographic Survey of Tar River “unnamed”
Tributary
Project Size: 60 acres
Project Location: Louisburg, Franklin County, NC
Within budget: YES
Date Completed: June 2002
Synopsis: Provide a topographic base map depicting existing conditions,
as well as stream features for design purposes. Features included ground
elevations, sewer mains, water mains, stream pools, ripples, creek banks,
buildings, etc.
Project: Contract Surveying, Construction
Staking MLK Bypass Ramps
Project Size: 800 feet
Project Location: Fayetteville, Cumberland County, North Carolina
Date of Completion: December 2003
Synopsis: Construction staking of the redesigned alignment
of the entry ramp from Ramsey Street with an additional turning lane.
Disclaimer
|
.GIF)
.GIF)